Part V | Composer |
Pattern Copy
Use this function to copy a pattern from a rhythm or from SEQUENCER data.
PATTERN COPY
Copy a rhythm to the COMPOSER.
•You can also copy a pattern from the
MEMORY.
1.On the COMPOSER MENU display, select
PATTERN COPY.
•The display looks similar to the following.
2.Select the pattern you wish to copy.
•In the FROM box, specify the settings with the corresponding buttons.
GROUP: Group name
RHYTHM: Rhythm name
PATTERN: Pattern name
•If ALL is selected, all the patterns are copied.
3.Select the memory you wish to copy to.
•In the TO box, specify the settings with the corresponding buttons.
MEMORY: Memory name (A, B or C)
PATTERN: Pattern name
•If ALL is selected, all the patterns are copied.
4.Use the ACCOMP DSP ∧ and ∨ buttons to specify whether or not the DSP effect settings at the source are also copied. (when the PAT- TERN was not set to ALL)
OFF:
The settings are not copied.
PART SETTING:
Only the part settings are copied.
TYPE & PART SETTING:
The DSP settings and part settings are copied.
5.Press the OK button.
•When copying has been successfully completed, “COMPLETED!” appears on the display.
•The DSP settings are the same as those in the MEMORY. For this reason, except for ALL copy, the settings may change and cause the sound nuance to change as well.
•If you wish to use the COMPOSER functions to edit the copied data, press the EDIT button, and follow the procedure to record a pattern.
Copying one part at a time.
1.Use the PAGE ∧ and ∨ buttons to select PAGE 2/2.
•The display looks similar to the following.
2.Use the MEM ∧ and ∨ buttons to specify the pattern to copy to.
3.Use the PART ▲ and ▼ buttons to specify the part you wish to copy to.
4.On the FROM side, use the buttons to specify the part to copy from.
•For the DRUM part you can specify the DRUMS 1 or 2 part; for other parts you can specify a part other than a DRUMS part.
5.On the TO side, use the FUNC ∧ and ∨ buttons to specify for each part whether or not to copy the data.
KEEP:
Part data is not copied.
CLEAR:
Part data is erased. COPY:
Part data is copied.
6.Press the OK button.
Composer
119
