Part II | Playing the rhythm |
PANEL MEMORY:
The PANEL MEMORY number (BANK A: 1 to 4) changes. You can store your desired panel settings in the PANEL MEMORY beforehand and switch from one to another quickly.
•After a few seconds, the display exits the set- ting mode.
•You can also access this setting display from the CONTROL MENU display. (Refer to page 178.)
Panel Memory
PANEL MEMORY stores all the current panel settings so you can recall them at the push of a button.
How to store the panel settings
By storing all the panel settings you use for a song in the same bank, for example, you can switch from one panel setup to the next in a flash.
1.Set up the desired panel settings (sounds, volumes, etc.)
2.Press the BANK VIEW button to turn it on.
BANK VIEW
•The BANK SELECT display appears.
3.Select the desired bank (A/B/C/1– 10).
•The bank selection display is comprised of two pages: 1/3 and 2/3. Use the PAGE buttons to switch pages.
4.With the SET button held down, press one of the numbered buttons of the PANEL MEMORY (1 to 8).
| PANEL MEMORY |
7 | 6 |
8 | 5 |
| SET |
1 | 4 |
23
•The panel settings are now stored in the specified bank and number.
BANK VIEW
After selecting a bank, you can use the PAGE buttons to go to the PAGE 3/3 page and confirm the memory names of that bank’s 8 memories.
•You can use the BANK ∧ and ∨ buttons to view other banks.
•You can also access this display by pressing and holding any of the PANEL MEMORY num- ber buttons (1 to 8) for a few seconds.
Playing the rhythm
65
