Setting display

When you select an item from the menu display, the setting display for the item is shown.

The buttons to the right, left and/or directly below the display are used to select and adjust the set- tings.

Example of setting display: MASTER TUNING

MUTE

Press the button corresponding to the or but- ton on the display to change the value.

In this manual, this procedure is written as follows: “Use the and buttons to adjust the pitch.”

TEMPO/PROGRAM

If the TEMPO/PROGRAM indicator is lit while you are using the display to adjust the setting, it indicates that this dial can be used to quickly change the displayed value or setting.

TEMPO/PROGRAM

The setting which can be adjusted is highlighted on the display.

EXIT

While the setting display is shown, press this but- ton to go back to the previous display.

DISPLAY

HOLD

EXIT

DISPLAY HOLD

Press this button to turn it on when you wish to maintain the current display. You can keep a dis- play which is normally automatically canceled, for example, or even during a performance, you can monitor information which is not shown on the normal display.

DISPLAY

HOLD

EXIT

The indicator for this button may flash if the current display is one which is normally auto- matically canceled.

If the PROGRAM MENUS button, for example, is pressed, the DISPLAY HOLD mode is can- celed.

CONTRAST

Use the CONTRAST buttons to adjust the read- ability of the display.

CONTRAST

When adjusting the CONTRAST, the set value is shown shortly on the display.

If you want to keep the set value, press the WRITE button. The instrument keeps the memorized value even after the power is turned off.

About the display

31

QQTG0671

Page 31
Image 31
Panasonic SX-KN7000 operating instructions Setting display, Tempo/Program, Exit, Display Hold, Contrast