Part III

Performance Pads

Record a phrase

“User Bank” A, B and C are reserved for storing your original phrases.

You can also copy phrases which are recorded in the SEQUENCER.

Performance Pads

1.Press the PROGRAM MENUS button to turn it on.

The display looks similar to the following.

2.Select PERFORMANCE PADS.

The display looks similar to the following.

3.Use the buttons to the left of the display to select a RECORDING BANK.

The display changes to the RECORD PAD display.

You can press the BANK NAMING button and assign a name to the bank.

If the BANK CLR button is pressed, all the data in the bank is cleared (a confirmation display appears).

4.Use the buttons below the display to select the pad number to record.

The display changes to the PAD RECORDING display.

You can press the PAD NAMING button and assign a name to the bank.

To clear all the current data in the selected pad, press the CLEAR THE PAD button, and then press the YES button on the confirmation display.

5.Use the MEASURE and buttons specify

the number of measures in the phrase. Use the TIME SIGNATURE and buttons to specify the time signature of the phrase.

6.Press the OK button.

For details about KEY SETTING, refer to page 111.

For details about CHORD MODIFY CHANGE, refer to page 113.

7.Select the part to record to.

Press the button for PART 1 or PART 2.

Two parts can be recorded (PAD 1– 4).

The display looks similar to the following.

8.Proceed to record.

The recording procedure is the same as for the COMPOSER. (Refer to page 112.)

There is no DSP SET.

In the PLAY SETTING, if LOOP is set to OFF, LOOP recording is not possible.

72

QQTG0671

Page 72
Image 72
Panasonic SX-KN7000 operating instructions Record a phrase