Part XIII

MIDI

Panel Memory Output

These are settings affect the transmission data when the PANEL MEMORY buttons are operated.

MIDI

1.On the MIDI MENU display, select PANEL MEMORY OUTPUT.

The display looks similar to the following.

2.Use the P.MEM and buttons to select a PANEL MEMORY number.

3.Use the OFF/ON and buttons to specify whether the data in the selected PANEL MEMORY number is transmitted or not.

4.Use the PART and buttons to select a part (RIGHT 1, RIGHT 2 or LEFT).

5.Use the PRGRAM CHANGE and buttons to specify a program change number (0 to 127, or OFF).

6.Use the BANK LSB and buttons to specify a BANK LSB (0 to 127).

7.Use the BANK MSB and buttons to specify a BANK MSB (0 to 127).

8.Use the VOLUME and buttons to specify the volume (0 to 127, or OFF).

9.Repeat steps 4 to 7 for each part, as neces- sary.

10.Repeat steps 3 to 9 for each PANEL MEMORY number, as necessary.

Computer Connection

These settings are used to select the mode related to MIDI signal flow when a personal computer is connected to the USB terminal of this instrument.

When connecting to a personal computer, install the USB driver on the included CD-ROM to the computer first. (Refer to the separate manual for more information.)

1.Turn off the power to this instrument.

2.Connect a personal computer to the USB ter- minal on the rear of this instrument.

3.Turn on the power to this instrument.

4.On the MIDI MENU display, select COM-

PUTER CONNECTION.

The display looks similar to the following.

5.Use the and buttons to select a mode.

NORMAL:

Ordinary mode

PC as master:

The mode which is appropriate for data trans- mission

KN as master:

The mode when this instrument is used as the master keyboard.

KN as slave:

The mode when this instrument is used as a slave instrument.

INTERFACE:

The mode when this instrument is used as a connecting device between a PC with only USB terminals and an instrument with only MIDI terminals.

196

QQTG0671

Page 196
Image 196
Panasonic SX-KN7000 operating instructions Panel Memory Output, Computer Connection, Puter Connection, Interface