Part IV | Sequencer |
ADVANCE/DELAY
Speed up or delay the sound production of specified performance data.
1.Use the TRACK ∧ and ∨ buttons to select the track you wish to edit.
•You cannot select the track for the CONTROL, RHYTHM or CHORD part.
•If ALL is selected, all tracks will be edited.
2.Use the FIRST MEASURE ∧ and ∨ buttons to specify the start point (measure number) of the change.
3.Use the LAST MEASURE ∧ and ∨ buttons to specify the end point (measure number) of the change.
4.Use the ADVANCE/DELAY ∧ and ∨ buttons to accelerate or delay the timing of the sound production (– 96 to +96).
•A + value causes the notes to sound later, and a – value causes the notes to sound earlier.
5.Press the OK button.
•The confirmation display appears. Press the YES button to execute the function, or press the NO button to cancel the function.
Sequencer
107
