Part X | Sound Edit |
3.Use the buttons below the display to assign a name.
•Press the ABC button to enter alphabetical characters. While the SHIFT button is pressed, upper case letters are entered.
•Press the 123 button to enter numbers, etc. While the SHIFT button is pressed, you can enter symbols.
•Press the POSITION button to move the cur- sor.
•You can also use the TEMPO/PROGRAM dial to select the characters.
•Press the INS button to enter a space at the cursor position.
•Press the DEL button to erase the character at the cursor position.
•Press the CLR button to erase the entire name.
•Press the →← button to center the name.
4.When you have finished typing the name, press the OK button.
•The display returns to the MEMORY WRITE display.
5.Use the ∧ and ∨ buttons to select the MEMORY number in which to store the new sound (1– 40).
6.Press the OK button.
•The new sound is stored, and “COMPLETED!” is shown on the display.
•The SOUND EDIT mode is turned off.
•The stored sound memories can be saved on a disk/an SD card for recall at a later time. (Refer to pages 130, 147.)
Select a new sound
You can select your original sound just like the other sounds in the SOUND GROUP.
1.In the SOUND GROUP section, press the MEMORY button.
MEMORY
•The list of sounds is shown on the display.
2.Select the desired sound from the list on the display.
Sound Edit
177
