Part IV | Sequencer |
Panel Write
You can change the panel status which is in effect at the beginning of the song. These are the settings which are recalled when the SEQUENCER RESET button is pressed.
1.On the SEQ MENU display, use the SONG ∧ and ∨ buttons to select the song number. Then select PANEL WRITE.
• The display looks similar to the following.
3.Press the OK button.
•“COMPLETED!” is shown on the display.
•PANEL WRITE is automatically activated at the when you start to record.
•For rhythm data, the data in the RHYTHM part has priority.
Sequencer
2.Use the panel buttons to change to the desired panel settings.
Song Select
You can select a desired song from the list of recorded songs.
1.On the SEQ MENU display, select RECORD & EDIT.
2.On the RECORD & EDIT display, select SONG SELECT.
•The display looks similar to the following.
3.Use the SONG SELECT ▲ and ▼ buttons to select a song.
•The total amount of memory used for the cur- rent song is shown as a percentage (%) to the right of the song name.
•If the NAMING button is pressed, the NAMING display appears.
•To optimize memory, songs you do not wish to preserve should be deleted. (Refer to page 97.)
86
