Part V | Composer |
Measure Edit
You can edit the recorded data one measure at a time.
Select the function you wish to edit.
1.During recording, press the MEASURE EDIT button.
•The display looks similar to the following.
2.Select the function.
3.Follow the procedure to edit the function (see below).
•Only the contents of the same pattern can be edited.
MEASURE COPY
Copy recorded data of specified measures to a specified point.
•On the destination track, the new data re- places the current measure contents.
1.Specify the measures you wish to copy from the source track (FROM).
•On the FROM side, specify the settings with the corresponding buttons.
PART:
Select the part to copy from. (If ALL is selected, all parts are copied.)
FIRST MEASURE:
Specify the first measure to copy.
LAST MEASURE:
Specify the last measure to copy.
2.Specify where you wish to copy the selected measures to.
•On the TO side, specify the settings with the corresponding buttons.
PART:
Select the part to copy to.
START MEASURE:
Specify the start point to copy the selected measures to.
3.Press the OK button.
•The confirmation display appears. Press the YES button to execute the function, or press the NO button to cancel the function.
•If the FROM and TO parts are the same and the FROM and TO measures overlap, copy is not possible.
Composer
117
