
Part XIII | MIDI |
MIDI
Common Setting
Set the functions which are common to all parts.
1.On the MIDI MENU display, select COMMON SETTING.
•The display looks similar to the following.
2.Use ▲ and ▼ buttons to select the item.
NOTE ONLY:
Of the performance data, specify whether or not only note data is exchanged.
PROGRAM CHANGE TO P. MEM:
Enable or disable the exchange of program change numbers for the RIGHT 1 part by operation of the PANEL MEMORY buttons.
•For this setting, the PANEL MEMORY 1 to 8 program change numbers correspond to the bank numbers as follows:
BANK A = 0 to 7 BANK B = 8 to 15 ...
INTRO,
Enable or disable the exchange of intro,
APC CONTROL:
Enable the exchange of data for the on/off sta- tus of the AUTO PLAY CHORD’s ONE FIN- GER, FINGERED and PIANIST modes.
FADE IN/OUT:
Specify whether or not FADE IN/OUT data is exchanged.
PROGRAM CHANGE MODE NX SOUND:
Program change numbers are standardized among NX SOUND Technics models which are set to this mode. The program change number assigned to a given sound on one model is assigned to the same sound on all models which are set to the same mode.
PREVIOUS TECH:
Program change numbers are standardized among
MAP R:
GS basic sounds are transmitted and re- ceived as GS program change numbers.
MAP Y:
XG basic sounds are transmitted and re- ceived as XG program change numbers.
*GS is a trademark of Roland Corporation. XG is a trade- mark of Yamaha Corporation.
DRUMS TYPE NX SOUND:
Keyboard percussion instrument sounds correspond to the same key note numbers for connected NX SOUND Technics models that are set to this type.
PREVIOUS TECH:
Keyboard percussion instrument sounds correspond to the same key note numbers for connected
SONG SELECT ON:
Song number data can be exchanged. OFF:
Song number data cannot be exchanged.
PREVIOUS MODEL MODE ON:
INTRO, FILL IN, ENDING and APC CON- TROL, FADE IN/OFF data are converted to CONTROL CHANGE data for previous models* and then transmitted.
OFF:
The above settings are not converted.
*“Previous models” include all Technics instrument models except for:
KN7000/6500/6000
PR604/804/603/703/903/1000
3.Use ∧ and ∨ buttons to change the setting.
4.Repeat steps 2 and 3 for the other settings as desired.
192