
Part VIII | Sound |
Master Tuning
This setting is used to
1.On the SOUND MENU display, select
MASTER TUNING.
•The display changes to the following.
2.Use the ∧ and ∨ buttons to adjust the pitch.
Key Scaling
For each part you can change the tuning of each key within a
Sound
1.On the SOUND MENU display, select KEY SCALING.
•The display looks similar to the following.
2.Press the OCTAVE TUNING TEMPLATE but-
ton.
•The display looks similar to the following.
3.Use the PART ∧ and ∨ buttons to select the part to set.
•If ALL is selected, all the parts are set at once.
4.Use the TYPE ∧ and ∨ buttons to select the type of tuning.
•Select from FLAT, WERCKMEISTER, KIRN- BERGER, ARABIC 1 to 5, SLENDRO, and
PELOG.
5.Use the SHIFT ∧ and ∨ buttons to select the key to perform in.
6.Repeat steps 3 to 6 for each part, as neces- sary.
7.Press the SET button.
•The OCTAVE TUNING for the specified type and key is automatically set.
Settings for each key.
On the KEY SCALING display, you can adjust the tuning for each key.
Use the buttons below the display to adjust the tuning for each key.
•The pitch can be raised or lowered by a max- imum of one
•You can use the PART SELECT ∧ and ∨ buttons to switch the part.
•Use the ALL PARTS INITIAL button to return all parts to the flat tuning.
159