
Part X | Sound Edit |
FILTER ENVELOPE TOUCH & KEY FOLLOW
Specify how the filter envelope (curve) changes relative to touch or note pitch.
1.Use the PAGE buttons to view the 4/4 display.
• The display looks similar to the following.
2.Use the buttons to the left of the display to select a tone.
3. Use the TOUCH ∧ and ∨ buttons to modify how the respective filter envelopes change relative to touch.
• Use the TIME ∧ and ∨ buttons to specify the time change, and the LEVEL ∧ and ∨ buttons to specify the level, relative to touch.
• At a – setting, the softer the keys are played, the greater the change. At a + setting, the harder the keys are played, the greater the change.
4.Use the ENVELOPE KEY FOLLOW ∧ and ∨ buttons to modify how the respective filter en- velopes change relative to note pitch.
•Adjust the respective slopes for attack (ATK),
decay (DCY) and release (RLS). Use the CEN- TER ∧ and ∨ buttons to specify the center of the bend slope by note name.
Amplitude Edit
Adjust the settings related to the volume of the sound.
Sound Edit
LEVEL
1.On the SOUND EDIT menu, select AMPLI- TUDE.
•The display looks similar to the following.
2.Use the buttons to the left of the display to select a tone.
3.Use the LEVEL ∧ and ∨ buttons to select the volume.
4.Use the TOUCH ∧ and ∨ buttons to set the amount of volume change in relation to how hard the keyboard is played.
•At a – value, the softer the keyboard is played, the louder the sound. At a + value, the harder the keyboard is played, the louder the sound.
5.Use the CURVE ∧ and ∨ buttons to select the type of volume curve depending on touch.
6. Use the LEVEL KEY FOLLOW ∧ and ∨ but- tons to change the respective key follow set- tings.
• Use the SLOPE ∧ and ∨ buttons to adjust the bend slope. Use the RANGE ∧ and ∨ buttons to specify the pitch range by note name.
7.Repeat steps 2 to 6 for the other tones, as desired.
172