SSPA-1 SPA PACK
• Single-Pump System •
This Quick Reference Card is a summary of your spa's main functions and provides a quick overview of operations accessible from your spa side keypad.
To start the pump:
Press the Pump key to turn the pump on at low speed. A second press will turn the pump to high speed. A third press will turn the pump off. A
The "Pump" indicator light will be on when the Pump is running.
To turn the light on:
Press the Light key to turn the light on. A second press will turn the light off. A
The "Light" indicator will be on when the light is on.
"Pump" indicator light
"Light" indicator
To change the water temperature: | "Heater" & "Set Point" indicator lights |
Press the Up or Down arrow key to increase or decrease the desired water temperature. The selected temperature setting will be displayed for 5 seconds as a confirmation.
The "Set Point" indicator light indicates that the temperature shown is the desired, and not the current, temperature of the water!
The temperature can be adjusted in
Water heater automatic start:
When the water temperature is 1˚F (0.5˚C) lower than the set point, the heater will be turned on automati- cally until the water temperature reaches the set point plus 1˚F (0.5˚C).
The "Heater" indicator light will be on when the heater is on.
Note: If your system is configured in Low Current Mode, the heater will not start if the pump is running at high speed.
