Part IV

Sequencer

MEASURE ERASE

Erase the recorded contents of specific meas- ures. You can also specify which type of data is to be erased.

Note that only the contents of the measures are erased, not the measures themselves; the length of the performance remains the same.

1.Use the TRACK and buttons to specify the track number.

This function does not work for the RHYTHM part or CHORD part in which a repeat com- mand has been stored.

If ALL is selected, data is erased from the specified measures of all the tracks at one time.

2.Use the FIRST MEASURE and buttons to specify the start point (measure number).

3.Use the LAST MEASURE and buttons to specify the end point (measure number).

4.Use the ERASE DATA and buttons to specify the type of data to be erased.

ALL:

All data is erased. NOTE:

Only note data is erased.

CONTROL:

Only control data (volume, effect and other panel settings as well as selection changes) is erased.

5.Press the OK button.

The confirmation display appears. Press the YES button to execute the function, or press the NO button to cancel the function.

MEASURE DELETE

Delete specified measures from a track.

The length of the performance accordingly decreases by the number of deleted meas- ures.

1.Use the TRACK and buttons to select the track from which measures are to be deleted.

This function does not work for the CHORD or RHYTHM track in which the repeat function has been stored.

If ALL is selected, the specified measures are deleted from all the tracks at one time.

2.Use the FIRST MEASURE and buttons, to specify the first measure to delete.

3.Use the LAST MEASURE and buttons to specify the last measure to delete.

4.Press the OK button.

The confirmation display appears. Press the YES button to execute the function, or press the NO button to cancel the function.

Sequencer

103

QQTG0671

Page 103
Image 103
Panasonic SX-KN7000 operating instructions Measure Erase, Measure Delete, All, Control