Part IV

Sequencer

SEQUENCER VOLUME

When playing the keyboard along with a recorded performance, you can adjust the total volume of all the playback parts as one.

Use the APC/SEQUENCER VOLUME slide con- trol to adjust the volume.

APC/SEQUENCER

VOLUME

MAX

MIN

Use this control to lower the volume of the recorded playback parts when it is too loud relative to the volume of your manual perform- ance.

The volume of all sounds other than your manual performance— including PERFORM- ANCE PADS, MIDI input, etc.— is lowered.

At the MAX position, the volume of the play- back parts correspond to their current settings; at the OFF position, the volume is 0.

The volume can be adjusted for each part. (Refer to page 29.)

Except during SEQUENCER playback or DIRECT PLAY of a disk, this slide control adjusts the total volume of all the automatic accompaniment parts.

During SEQUENCER recording, the volume is automatically at its maximum regardless of the position of the slide control. During playback, however, lowering the slide control from the MAX position will lower the volume from its recorded level. For this reason, the slide con- trol should normally be left in the MAX posi- tion.

Naming

Here is the way to assign a name to your recorded song.

1.On the SEQ MENU display use the SONG SELECT and buttons to select a song.

2.Press the NAMING button.

The display looks similar to the following.

3.Use the buttons below the display to assign a name.

Press the ABC button to enter alphabetical characters. While the SHIFT button is pressed, upper case letters are entered.

Press the 123 button to enter numbers, etc. While the SHIFT button is pressed, you can enter symbols.

Press the POSITION button to move the cur- sor.

You can also use the TEMPO/PROGRAM dial to select the characters.

Press the INS button to enter a space at the cursor position.

Press the DEL button to erase the character at the cursor position.

Press the CLR button to erase the entire name.

Press the →← button to center the name.

4.Press the OK button.

Sequencer

85

QQTG0671

Page 85
Image 85
Panasonic SX-KN7000 operating instructions Naming, Sequencer Volume