Panasonic SX-KN7000 operating instructions Fade OUT, Fade SET

Part II Playing the rhythm

FADE OUT

At the end of the song, the volume of each part gradually fades to nothing.

1.Start the performance.

2.Turn on the FADE OUT button at the point you want the fade-out to start.

FADE

IN OUT

•The volumes of all the parts slowly fade to 0.

•The indicator flashes to show that fade-out is completed, and then goes out. The volumes for all parts return to their specified settings.

•If you wish to interrupt the fade-out, press the FADE OUT button to turn it off.

FADE SET

Adjust the settings for the FADE IN and FADE OUT.

1.Press and hold the FADE IN or FADE OUT button for a few seconds.

FADE

IN OUT

•The display looks similar to the following.

2.Use the ▲ and ▼ buttons to select the item. Use the ∧ and ∨ buttons to change the setting.

FADE IN

Time:

Specify the time elapsed between 0 volume to the set volume (1 measure to 16 mea- sure).

FADE OUT

Time:

Specify the time elapsed between the set volume and 0 volume (1 measure to 16 measure).

Auto Reset:

Specify whether the volume of each part automatically returns to its specified setting (ON, OFF).

Rhythm Auto stop:

Specify whether the rhythm turns off after fade-out is completed (ON, OFF).

SEQ Auto stop:

Specify whether the SEQUENCER play- back automatically stops after fade-out is completed (ON, OFF).

•The display returns to the previous display a few seconds after you have changed the set- tings.

•You can also access this display from the CONTROL MENU display. (Refer to page 178.)

Playing the rhythm

59

QQTG0671