Sound
Part VIII | Sound |
ORIGINAL tuning
Each instrument of each sound has its own orig- inal tuning data. This setting affects the tuning curve that spans the entire keyboard. So, for ex- ample, the acoustic
You can specify for each part whether this orig- inal tuning is enabled or not.
1.Use the PART SELECT ∧ and ∨ buttons to select a part.
2.Use the ORIGINAL TUNING ON/OFF button to select ON or OFF.
Sound Load Option
The data for each individual sound is set with the most suitable effect settings, etc., but in some cases when switching from one sound to another and these settings are recalled, the setup is not the way you want it. By using the SOUND LOAD OPTION, you can adjust the settings so that specific data is not recalled.
1. On the SOUND MENU display, select SOUND | 2. Use the ▲ and ▼ buttons to select an item. | |
LOAD OPTION. | Use the | ∧ and ∨ button to set the filter to ON |
• The display looks similar to the following. | or OFF. |
|
Monitor Setting
When the external speakers are connected to the instrument’s output terminals for use on the stage, etc., the instrument’s speakers can be turned off as desired.
1.On the SOUND MENU display, select MONI-
TOR SETTING.
• The display looks similar to the following.
2.Press the OFF button.
•The speakers are turned off.
•Press the ON button to turn the speakers on.
•The speakers are turned on whenever the power is turned on.
•Note that, when the speakers are turned off, the headphone output is also turned off.
•When the speakers are turned off, a MONI- TOR OFF indication is shown in the upper part of the normal display.
160
