5672 BT Synergy 3105 UG [4] 11/11/03 3:59 PM Page 47
BT Synergy 3105 – Edition 4 – 11.11.03 – 5672
General information | 47 |
|
|
Dialling mode
1.Press 
then scroll 
to SETUP and press 
.
2.Scroll 
to DIAL MODE and press 
.
3.Press 
or 
to select either TONE or PULSE and press 
to confirm.
Automatically insert a pause after access code
With some switchboards, you may be required to dial a pause after entering the switchboard access code (e.g. 9) to enable you to get an outside line.
This feature automatically inserts a pause between the access code and the telephone number you have entered in the phonebook. However, for this feature to work, you must still enter the access code before the telephone number when storing the number in the Phonebook.
1.Press 
then scroll 
to display SETUP and press 
.
2.Scroll 
to display PABX and press 
.
3.Scroll 
to PBX 1 and press 
to display PIN?
4.Enter the PIN (original code 0000) and press 
.
5.Enter the switchboard access code (e.g. 9) and press 
.