BT 3105 manual Getting started, Handset range

Page 6

5672 BT Synergy 3105 UG [4] 11/11/03 3:46 PM Page 6

BT Synergy 3105 – Edition 4 – 11.11.03 – 5672

6Getting started

WARNING

Do not place your BT Synergy 3105 in the bathroom or other humid areas.

Handset range

The BT Synergy 3105 has a range of 300 metres outdoors when there is a clear line of sight between the base and handset. When there is no clear line of sight between the base and handset, e.g. base indoors and handset either indoors or outdoors, the range could be reduced to 50 metres. Thick stone walls can severely affect the range.

Signal strength

The symbol on your handset display indicates when you are in range. When you are out of range, it flashes and BASE 1 is displayed.

The base station must be plugged into the mains at all times.

IMPORTANT

Do not connect the telephone line until at least one of the handsets is fully charged.

The base station must be plugged into the mains power at all times.

You must charge your handset for 16 hours before you can use it.

Which socket?

Power socket

Telephone line socket

Location

You need to place your BT Synergy 3105 within 2 metres of a mains power and telephone socket so that the cables will reach.

Make sure it is at least 1 metre away from other electrical appliances to avoid interference.

Your BT Synergy 3105 works by sending radio signals between the handset and base. The strength of the signal depends on where you site the base. Putting it as high as possible ensures the best signal.

Setting up

1.Plug the mains power cable into the base. Use the power supply with the clear plastic end.

The green Power/In use light comes on.

Image 6
Contents User Guide Welcome… To your BT Synergy 3105 digital cordless telephoneMains power adaptor Item code 003313 Belt clip This guide Replacing handset batteries Helpline Additional handset settingsHelp General informationGetting started Handset rangeBattery LOW Warning Your BT Synergy 3105 is now ready for useHandsets If you have purchasedBT Synergy 3105 with multiple Your BT Synergy 3105 handset is now ready for useGetting to know your phone Handset buttonsBase Press to page the handset,Display icons This is where the icons will appear Synergy HS1To select volume Navigating the menusScroll Menu map Using the phone Call timerHandsfree Redial Dial the number then pressSecrecy PagingPhonebook You can store up to 50 names and numbersPress Then use To scroll to the entry You wantPress Then enter the first letter of the name you Using the phone Handset settings Keypad beepsPress Then Keypad is now locked External/Internal ringer melodyKeypad lock Press ThenKeypad to enter a new name and press To confirm Language Base settings Select a base Space provided onYour BT Synergy 3105 is now reset to its default settings Handset and base default settings are Handset & base ringer volume Internal and External handsetPause after picking up line Caller Display and Call Waiting Caller DisplayCaller Display and Call Waiting If an incoming call arrives while you are already on Call WaitingIs displayed Press Phone, you will hear a soft beep every 5 seconds. ThisPress R to put you current call on hold and speak to Accept a Call Waiting callIf, during a call, you hear the call waiting beep Second callerAdditional handsets & bases Additional handsets & bases Enter For the base you want to register toUntil the handset locates the base Internal calls Transferring callsPress Int and enter the handset number you want to call Handset priority Scroll to select the option you want, either Base or Help Radio, TV, computer Switched on Buzzing noise on myCharging properly Switched on Or hearing aid0870 605 Safety information General informationGeneral information Guarantee General information Technical information Only use approved AAA NiMH rechargeable batteriesConnecting to a switchboard Declaration of ConformanceBT Synergy 3105 UG 4 11/11/03 359 PM Date of purchase Place of purchase Serial number Offices worldwide