BT Hub Phone 1010 manual Press

Hub Phone 1010 [3]DkBlue 13/4/06 5:45 pm Page 58

Hub Phone 1010 – Edition 3 – 13.04.06 – 7451

58Using additional handsets

		2. Press	or	to scroll and display REGISTRATION and
		press OK		.
		3. REGISTER HANDSET is displayed, press OK						to select.
		4. BASE 1 is displayed. Press			or	to select the base
If your handset is already registered		number you want to register to and press OK							.
to a base, the * symbol will be		5. SYSTEM PIN is displayed. Enter the PIN code using the
shown to the right of the base
number.		keypad and press OK			to confirm and begin
If there are already 5 handsets
		registration.
registered to the base you will hear
a double beep.		6. BASE SEARCH X is displayed (where X is the base
Each digit of the PIN code will be		number). When registration is successful HANDSET
displayed as a * for security		REGISTERED is displayed. Press OK					to return to
reasons.
Press Clear	if you enter an	standby.
incorrect digit.		The handset will automatically be allocated the next
If you enter the wrong PIN code
		available handset number which will be displayed when in
you will hear a double beep.
		standby mode.
If registration fails, the handset will
return to standby mode and you
will need to repeat the registration
procedure and try a different base
number.