BT Diverse 2000 user manual Baby Alarm

Page 40

Baby Alarm

To switch the baby alarm ON and OFF

The baby alarm sets up a connection between two handsets registered to the same base. When a noise registers in the first handset, the second handset rings. If the call to the second handset is answered, conversation is possible. The default setting for this service is OFF.

The baby alarm will not work in conjunction with call barring. For the baby alarm to work properly, all handset batteries must be fully charged and the handset in the ‘baby room’ must not be placed in a charger, as this will cover the microphone.

Ensure that the handset in the ‘baby room’ is out of reach of the baby, (due to the small and sharp parts that are present).

WARNING

Please note that the Baby Alarm

does not provide continuous

monitoring but is activated only by

noises over a certain volume.

It should therefore only be used as

a support to your existing baby monitoring system and NOT as an alternative.

On the handset in the ‘baby room’:

OK

--––

•Press the MENU button.

•Select BABY ALARM.

•Press OK.

•Enter the extension number of the handset you want to ring as the alarm.

38

Image 40

Contents Diverse 2000 Executive Handset user guide See page 33 for more information about your handset PIN At a glance DisplayPage This guide Introduction Page General cleaning Approved rechargeable batteries Setting Up Install the rechargeable batteries in the handsetFit the handset belt clip Charge the handset batteries for at least 16 hoursBattery performance Getting the most out of your batteries Internal Redial At the base station Press the PWR button. The display shows Register Base Settings Service Using Diverse Executive Handset On/Off and Protected modesMaking and receiving external calls Phone rings and the display shows Paging and making calls between handsets Recall Using the Phone Book To dial a number stored in the phone book Delete Entry Settings Enter PINHighlight Ringer Options using Down option Handset VolumeRinger Volume or Ringer Tone To adjust the ringer volume Handset SettingsTo switch on and remove advisory beeps and warnings Select Handset Settings Select Handset Settings Select Auto BacklightSelect Handset Settings Select Auto Talk If you accidentally set the wrong language Select Handset Settings Select Babyalarm Level Call timer Additional featuresSecurity Settings Operating with additional base stations BestSelect Priority Selection Select Base SettingsChange Base Name Select DE-REGISTER Base Baby Alarm Call Barring Select Handset LockShort Cuts Short Cuts Copied To create a new short cut Adding short code functions Function table Function DisplayOFF Viewing Then ENTRIES? Service MaintenanceIf you have to return your Diverse 2000 Executive Handset Help Replacing handset batteries No display appears Page Technical information Connecting to switchboards Index PIN Page Offices in Europe, North America, Japan and Asia Pacific