To erase a registration code
•Press the QUICKDIAL button.
•Press the CHANNEL SEEKER button.
•Press the ✱ button four times.
•Press the QUICKDIAL button. You will hear a confirmation beep, the old registration code is now erased and you can re- register your additional handset following the procedure above.
To
If necessary you can
Before
To check that your additional handset is registered correctly
•Lift the additional handset.
•Press the TALK button.
•Listen for the dial tone.
If you do not hear a dial tone, your additional handset is either out of range of your Freestyle 130, the Freestyle 130 phone line cord is not plugged in, it has not been registered properly or you may have purchased the wrong
Freestyle 90/130/1200 Additional Handsets
handset - check that the handset you have is item code: 871267. This can be found on the side of your giftbox.
Setting the handset number
Each additional handset must be assigned an identity number (1, 2, 3 or 4). Your Freestyle 130 handset is already numbered as HANDSET 1, additional handsets can then be numbered as they are added.
Your Freestyle additional handset is
To set a handset identity number
•Press and release the
QUICKDIAL button.
•Press and release the SECRECY button.
•Enter the identification number
•When you have entered the number press the QUICKDIAL button.
•You will hear a beep confirming that the new number has been stored.
Make a note of the identification number by writing it on the handset’s directory label.
21