6329 Calypso 120 UG | 4/10/04 4:25 pm Page 67 |
BT Calypso 120 – Edition 04 – 04.10.04 – 6329
General information | 67 |
|
|
Access code and entering a pause
If you are connecting your BT Calypso 120 to a switchboard/PBX you may need to prefix stored numbers with an access code (e.g. 9) in order to get an outside line. So that the switchboard has time to pick up an outside line, you may also need to add a Pause after the access code.
PABX access code
1.Press Menu then scroll to Handeset and press OK.
2.Scroll to PABX access code and press OK.
3.Display shows Set Code. Press OK.
4.Enter your PABX access code and press Save.
5.Scroll to ON and press OK.
6.Press and hold Back to return to standby.
Entering a pause
A pause is entered when storing a number in the phonebook (see page 23) or PABX access code by pressing and holding the button until the display shows P.
Recall
The (Recall) button is used when connected to certain switchboards (PBXs) and with some BT Calling Features, or equivalent services available via your Network Provider.