Clarity C600 manual Troubleshooting, Unit will not operate/no dial tone, Few devices

Page 26

Troubleshooting

The unit will not operate/no dial tone:

¥Verify the TALK Button is lit.

¥Verify the AC Adapter is securely plugged into AC outlet, the base and the telephone.

¥Verify the telephone line cord is securely plugged into the wall jack and the telephone.

¥Make sure the base antenna is in an upright position.

¥Make sure the handset battery is fully charged.

¥Verify the telephone is in the correct dialing mode, tone (touch) or pulse (rotary).

¥Make sure you are in the usable range of the base station.

¥Reset the security code by placing the handset in the base for 5-10 seconds.

The phone does not ring when you receive a call:

¥Make sure the RINGER switch on the handset and base are set to ON.

¥Verify the AC Adapter is securely plugged into AC outlet, the base and the telephone.

¥Verify the telephone line cord is securely plugged into the wall jack and the telephone.

¥Make sure you are in the usable range of the base station.

¥You may have too many extensions on your line.Try unplugging a

few devices.

Noise, Static, Interference or Other Calls Heard while Using the Handset:

¥Try changing channels.

¥Make sure the base antenna is in an upright position.

¥Make sure you are in the usable range of the base station.

¥Make sure the handset battery is fully charged.

¥Try relocating the base unit to another location.

¥Make sure the AC Adapter is not plugged into the wall outlet with other appliances.

26

Image 26

Contents GHz Cordless Telephone with Caller ID Table of Contents Important Safety Instructions Read and understand all instructionsUse caution when installing or modifying telephone lines Safety Instructions For BatteriesNever install telephone wiring during a lightning storm Designed for wet locationsMm Headset Jack FeaturesDEL/Channel Button DEL/CH Volume Control Talk Button Talk Key Pad Neckloop Jack Handset Charging ContactsTelephone Base Base Side/End/Bottom Table/Desktop Installation InstallationConnecting Your Telephone Getting StartedPlace handset in the cradle to begin initial charging Wall Mounting InstructionsLift the bases antenna to a vertical position Handset Battery Charging Battery InstallationTo Install a New Battery Low BatteryHearing Aid Compatibility Headset JackBelt Clip Feature Set-up Caller ID DisplaySetting Voicemail no Setting LDS CodeSetting Easy Mode Setting Message Waiting ON/OFFTelephone Base Pulse/Tone Boost ON/OFF SwitchBattery Backup FlashTelephone Operations Page/Handset Locator Temporary ToneLighted Key Pad Channel OperationReview Phonebook Information Memory StorageMemory Operations Adding a Phonebook NumberDeleting All Stored Numbers Dialing a Phonebook EntryDeleting a Stored Number No actionDeleting the Emergency Number Adding the Emergency NumberDialing the Emergency Number Caller ID Information Visual Message Waiting Indicator VmwiCaller ID Operations Saving Caller ID Information to Phonebook Callback from Caller ID Area Code + 7 digits without a 1 prefix Information Digits without a 1 prefix Digits with a 1 prefixDeleting All Caller ID Information Delete Caller ID InformationDelete One Caller ID Information Maintenance and Care Avoid dropping or knocking the unitUnit will not operate/no dial tone TroubleshootingPhone does not ring when you receive a call Few devicesPhone Will Not Hold Charge Difficulty in Placing or Receiving CallsRegulatory Compliance Part 68 of FCC Rules InformationCustomer-Owned Coin/Credit Card Phones Part 15 of FCC Rules InformationIndustry Canada Technical Specifications EquipmentWarranty and Service Canada How to Obtain Warranty ServiceUnited States Fax 514