6488 BT Freestyle 6300 UG [4] 18/10/04 11:02 am Page 55
BT Freestyle 6300 – Edition 4.0 – 15.10.04 – 6488
Help 55
Cannot dial out or receive calls
nThe batteries may need recharging.
nHas there been a power cut? If so, place the handset back on the base for 10 seconds and try again. If it still does not work disconnect the batteries and mains power for 10 minutes, then reconnect and try again.
You have a dial tone, but the phone will not dial out
nYou may need to change the dial mode from tone to pulse, see page 46.
nIf you are connected to a switchboard, check whether you need to dial an access code.
Handset does not ring
nThe ringer volume may be switched off, see page 40.
nMake sure the handset is registered to the base, see page 48.
icon is flashing
nIs the handset registered correctly to the base? See page 49.
Check that the handset is within range of the base.