BT 1100 manual Transferring calls, To set the handset number, To transfer a call

To set the handset number

Note

Secrecy

2 - 4

Each additional handset must be assigned an identity number (2, 3 or 4). Your Quartet 1100 handset is already registered as HANDSET 1. A Quartet additional handset is pre-set as HANDSET 2. However, further additional handsets can be numbered as they are added.

Press the QUICKDIAL button.

Press the SECRECY button.

Enter the handset number between (2 and 4).

Press the QUICKDIAL button. You will hear a beep confirming that the new number has been stored.

Make a note of the handset number by writing it on the quickdial label on the additional handset’s charger.

Transferring calls

You can transfer calls between handsets that are registered to the base unit.

To transfer a call

During your call press the Secrecy SECRECY button and then

the handset number that you want to transfer the call to.

The called handset will ring.

If the call is not answered within 30 seconds the calling handset will ring.

Press the TALK button to speak to the caller.

If after a further 30 seconds the call is not taken the caller will be disconnected.