Cobra Electronics C P - 7 2 0 Using the Speakerphone, To Use The Intercom/Pager, As a Monitor

3	1
5

USING THE BUILT-IN INTERCOM/PAGING SYSTEM

Call Dad to dinner, monitor the baby while you do laundry or keep an ear out to make sure that the children aren’t hurt. These options, along with many others, are at your fingertips with your Cobra Intenna because it doubles as a two-way intercom/paging system between the base and the handset—and outside calls will still come through! If you should misplace the handset, simply activate the pager and follow the signal until you locate it.

To Use The Intercom/Pager

1

1. If you are at the handset and wish to

INTCM

speak with someone at the base, press and release INTCM which will

2sound three rings and light the red

	4. If someone tries to reach you on the
5	Intercom while you are talking on the
	handset, you will hear three rings.
HOLD	Press HOLD, then INTCM on the
	handset. (The base will beep and
	speakerphone will activate.

1Speakerphone LED will flash when there is a call on hold). Your caller will

INTCM	then be put on hold while you
	answer the INTCM. The TALK button
3	will flash to remind you that you have
	a call on hold. Press TALK again to
TALK	disconnect the INTCM and
	reconnect with your telephone call.

To Use The Intercom

To Use The Pager

As A Handset Locator

2

1. To locate a misplaced handset around

INTERCOM

the home, press and release the INTERCOM button on the base.

12. The handset will sound a series of three beeps for 30 seconds, giving

INTCM	you time to locate it. Once found,
	press and release the INTCM button
	on the handset to eliminate the
	signal.

3.If you have not located the handset in 30 seconds, repeat steps above.

INTERCOM

indicator next to the INTERCOM button on the base. The person may then respond just by speaking into the base. To end the conversation, simply press the INTCM button on the handset again.

As A Monitor

1

Monitor the room in which the base is

INTCM

located from another location using the Intercom feature.

USING THE SPEAKERPHONE

13

2

4

Cobra®

2.If you are at the base and wish to page someone at the handset, press and release INTERCOM, which will sound a series of three beeps and light the INTCM button on the handset. The person may then respond by pressing INTCM and speaking into the handset.

3.If you receive a call during an

3intercom conversation, you will hear

TALK a low volume ringing. If you are at the handset, press TALK, which will disconnect the intercom and connect you with the incoming call. If you are

4at the base, press SPEAKERPHONE.

SPEAKER-

PHONE

1. Press INTCM button on the handset. This engages the itercom microphone in the base, allowing you to listen to the base location area.

2. Listen through the handset for as long as you like.

1 3. Disconnect by pressing INTCM again.

INTCM

4.If you receive an incoming call while you are using the monitor, you will hear a ringing in the handset.

35. Press TALK to connect the call. The Intercom is automatically

TALK disconnected.

Whether you’re conducting a business meeting or want to let everyone in the family hear and talk when grandma calls to say “hello”, nothing beats the convenience of our new speakerphone.

To Use The Speakerphone

4

After your call is connected, simply

SPEAKER- press the button on the base next to

PHONE

SPEAKERPHONE and the red LED will light, indicating that the speakerphone is on. If desired, one person may continue to speak through the handset while connected. Press the button again to disconnect.

CP-720

NEED HELP? 1-773-889-3087