MPH-4385 (REVISED2/01).O/M.QXD 6/20/01 7:41 AM Page 12
CALLER ID OPERATION
RECEIVING CALL
1TALMOAM HOLLYCALL# NEW
2 | UNAVAM | ILABLECALL# NW |
Make sure that the Caller ID service is turned on by your phone company. When you receive a call, the display will show the name, number, time and date of the caller.
If a call is received from an area which does not provide caller ID service, the display will show, “UNAVAILABLE”.
3 |
AM |
BLOCKEDCALLCALL# NEW |
4 |
If a call is received from a caller that has blocked his/her information, the display will show, “BLOCKED CALL”.
To answer the call, press the SPEAKERPHONE button, or pick up the handset. The timer will appear and then start counting after 15 seconds.
5 |
|
AM |
|
TOTAL 03 | NEW 03 |
The display will indicate the total calls and the new calls. When you want to check the calls received, press the UP or DOWN buttons.
The NEW CALL indicator will blink when the caller ID registered new calls.
NOTES:
•When you receive a call, the unit will automatically set the time and date.
•The caller ID memory can store up to 80 name/numbers.