Marquis 9002MWD manual Using The Hold Feature Base Unit, Using The Mute Feature

Page 32

Using The Hold Feature (Base Unit)

The “Hold” key is used to place a caller on hold. To use, simply press the “Hold” key. The LED light will show a steady RED to indicate that the line is on hold.

When placing a caller on hold, the line will not be disconnected. To return to the caller, press the active line key on the base. The speakerphone will be re-activated.

Note: Pressing the line key on the base when the handset is on hold will activate the line on the base unit. The handset will stay on hold but the base will be active.

Using The Mute Feature

A “Mute” key is provided to allow for privacy during a background conversation. When the “Mute” key is activated, the microphone in the speakerphone within the base becomes disabled. When the “Mute” feature is activated, the caller will not hear your voice. The “Mute” key will illuminate to show that the feature is activated indicated by a solid red LED.

To de-activate, press the “Mute” key again. The LED turns off.

The Mute feature only works on the base unit. The handset does not mute out when the MUTE key is active.

32

Image 32

Contents Marquis 9002MWD TWO Line Cordless Hotel Telephone Page Page Important Safety Instructions FCC Part 15 Compliance Canadian Emissions ComplianceDOC Notice and Load Number Statement Notification to the Telephone Company Consumer Information Page Page TOP Unit Base Unit Handset View Handset Unit TOP Side Left Side Bottom Page Parts Check List Wall Mounting Your Telephone Power Adapter Line Connection Power Adapter Phone ConnectionInstall the Handset Battery Removing the Handset Battery and Battery CoverCharging the Handset Battery Battery Life When Completely ChargedMessage Waiting Lamp Guest Service Keys Speed Dial Memory Step ProcedureTouchLiteTM Feature Programming The TouchLiteTMProgramming a Flash Into Memory Programming a Pause Into MemoryHandset Dialing Placing a Call Using The HandsetPlacing a Call To Guest Services Using the Handset Placing a Call Using The Base Unit Base Unit DialingTechnology Feature Frequency Range Limitation Locating The HandsetUsing The Handset Volume Control Using The Speakerphone Volume ControlLine Status Indicators Base Unit Line Status Indicators Handset UnitUsing The Data Port Using The Hold Feature Base Unit Using The Mute FeatureRedial Optional Using The Conference Feature On the Handset Handset OnlyPlacing a Call Using Speakerphone on Base Unit Page Statement of Limited Warranty Spare Parts List To Place An Order