Notification to the Telephone Company

Before you may connect your telephone you must notify the telephone company of particular line(s) to which such connections is to be made, and provided to the telephone company the FCC registration number and ringer equivalence number of the registered protective circuitry. The customer shall give notice to the telephone company upon final disconnection of such equipment or circuitry from the particular line(s).

MALFUNCTION OF TELEPHONE

In the event that your telephone fails to work properly during your ownership and use of it, you should disconnect it from the telephone line to determine if it is your phone, which is not working properly, or if it is problem in the telephone company's network. If the problem is with your telephone you should discontinue its use until it is repaired.

TELEPHONE CONNECTION REQUIREMENTS

Except for telephone company- provided ringers, all connections to the telephone network shall be made through standard telephone company provided jacks, in such a manner to allow for easy and immediate disconnection of the terminal equipment. Standard jacks shall be so arranged that if the plug connected thereto is withdrawn, no interference to the operation of the equipment at the customer's premises which remains connected to the telephone net work shall occur by reason of such withdrawal. These telephones may not be used on party lines or coin operated lines.

CHANGES IN TELEPHONE COMPANY EQUIPMENT OR FACILITIES

The telephone company is entitled to make changes in its facilities equipment, operations, and procedures. Should these changes be expected to render your terminal equipment incompatible with the telephone company's facilities you will be given sufficient notice to allow you to make the necessary modification to your terminal equipment without any interruption of your service.

“Basically, the adaptor in package and the phone unit are operating together. The phone unit will not function and cannot access the phone line without the assigning packaging adaptor and wiring. Furthermore, the phone design is a properiatary one and cannot directly connect to the network without the adaptor.”