Motorola L702CBT, L701M, L702M, L703 Setting the area code, Registration, Registering a handset

2.Press MENU and then VOL+ or REDIAL/VOL- to select

FLASH TIME.

3.Press MENU and then VOL+ or REDIAL/VOL- to the flash time you want. (8 options are available : 90, 100, 110,

250, 300, 400, 600 and 700MS)

4.Press MENU to save.

3.17Setting the area code

1.Press MENU and then VOL+ or REDIAL/VOL- to select

SETUP BS.

2.Press MENU and then VOL+ or REDIAL/VOL- to select

AREA CODE.

3.Press MENU and then enter the area code.

4.Press MENU to save.

3.18Registration

3.18.1 Registering a handset

Up to 5 handsets can be registered to one base. The original handset is pre-registered to use. Additional handsets must be registered to the base before you can use them.

To register an additional handset,

1.Press MENU and then VOL+ or REDIAL/VOL- to select

SETUP HS.

2.Press MENU and then VOL+ or REDIAL/VOL- to select

REGISTRATION.

3.Press MENU and then VOL+ or REDIAL/VOL- to select

YES or NO.

4.Select YES then press MENU to enter the registration procedure as follows:

1.Press and hold FIND for around 4 seconds on the base.

2.Place the unregistered cordless handset on the base or charger.

3.A confirmation tone is generated if registration is successful. HANDSET X is displayed where X denotes the number of handsets, and then the phone returns to idle.

To register an originally unregistered handset, follow steps 1 through 3 above.

Using the phone 21