3.Press MENU and then VOL+ or REDIAL/VOL- to select
ON or OFF.
4.Press MENU to confirm.
To enter the remote access mode, dial your phone number from another phone, when you hear the announcement, press TONE/* on your another phone and then enter the 4- digit remote security code (the default code is 0000). The correct sequence of the 4 security PIN digits needs to be detected before entering remote access mode. Random digits detected prior to the correct 4 digits sequence are ignored, and the answering machine recording continues until the complete PIN is detected. There is no system prompt to enter the remote access code.
Press the following keys on your another phone to perform the following functions, after entering your remote access mode.
Press... To...
1Repeat the message
2Play/Stop the current message playback
3Skip forward to the next message
4Toggle Answer Off/Announce Only/Announce and Record modes
5Delete the message
7Listen to the Main Menu (for full voice prompts only)
3.21.10 Setting the security code
This is used to change the remote access PIN if necessary.
1.Press MENU and then VOL+ or REDIAL/VOL- to select
ANSWER MACHINE.
2.Press MENU and then VOL+ or REDIAL/VOL- to select
SECURITY CODE.
3.Press MENU and then enter the 4- digit security code.
4.Press MENU to save.
26 | Using the phone |
|
|