Direct dialling
1.Press the 
key and wait for the dialling tone.
2.Dial the telephone number and complete the call.
When the call is connected, the call duration will be displayed and will remain in the display until 3 seconds after the call is ended.
The call timer format is HH:MM:SS.
3.Press the 
key to end the call.
On-hook dialling (pre-dialling)
1. Dial the telephone number.
2. Delete any incorrect digits by pressing the | key. |
3.Press the 
key. The displayed number is dialled.
4.To end the call, press the 
key.
Using the Handsfree Speakerphone
In handsfree mode, all communication is via the handset speakerphone and microphone, leaving your 'hands free'.
You can make a call handsfree or switch to handsfree during a call.
Make a handsfree call
In standby mode:
1.Dial the telephone number and press the 
key. The handset speaker comes on. Or
2.Press the 
key and wait until the handset speaker comes on, then dial the telephone number as required.
3.Hold your conversation - speak to the caller through the microphone and listen over the speaker.
4.Press the 
key to end the call.
Using the Telephone
17