Using the Menu
Entering Names and Numbers
To enter characters, press the relevant key the corresponding number of times according to the position on the key. For example, to enter an L, press the 5 key three times or to enter a B press the 2 key twice.
Delete incorrect digits by pressing the 
key.
Press the * key to switch between lower/upper case and number only entry.
If 2 consecutive characters are on the same key, enter the first character, then wait for the cursor to move to the right before trying to enter the next character.
Press the 1 key or # key repeatedly to enter punctuation symbols. Press the 0 key twice to enter a space.
3.Enter the first number for this name (max. 24 digits) and press 
to confirm.
4.Repeat point 3 to enter 2 further numbers for the name. Or
If you do not want to enter any further contact numbers, press 
twice to go directly to the 'Set Group' menu.
Entering a Dialling Pause (P)
If the telephone is connected to a switchboard/PBX network, it may be necessary to insert a pause in the dialling sequence.
When entering a number, press and hold the 
key where a pause is required. A "P" will be displayed.
5.Press 
or 
to select a caller group and press 
to select.
Save OK is displayed and then the list of phone book entries is displayed.
6.Press the 
key to return to standby mode.
24