Registering Additional Handsets
Your ME7158 handset can be registered for use with up to 4 different base stations. A maximum of 6 handsets can be registered to use with your ME7158 base station.
Note: Any additional handsets must be GAP compatible. Even if a handset meets GAP standards, it is still possible some handset functions will not be available.
To register a new handset to your ME7158 base, you need to put the base into registration mode:
At the base:
1.Press and hold the Page key. The base will beep twice and the orange light will flash for one minute.
On the handset, in the base settings menu:
1.Press the 
or 
key to display Register handset and press the 
key to select.
2.Press the 
or 
key to select the number of the base you want to register the
handset to and press the 
key to confirm.
Note: The base stations that your handset is already registered to will be indicated by **.
3.Enter the handset PIN code and press the 
key to confirm.
If the correct PIN is entered, the handset displays Searching while it attempts to connect with the base station. If registration is successful, OK is displayed.
4. Press the | key to return to standby mode. |
Once the registration procedure is complete, the new handset will automatically be allocated the next available handset number. This number will be shown on the display.
Using the Menu
47