SpectraLink Corporation | Setup and |
| Mitel Networks ICP and 5220 IP Phone emulation |
7.2Feature Access
In its standby state, the Wireless Telephone displays the extension assigned to this Wireless Telephone. The active state is initiated by pressing either the Start Call key or the MENU key. When the active state is initiated, the Wireless Telephone contacts the PBX and displays the data provided – the time, date, default line icon, any voicemail icon, and softkey and feature key labels. If the Start Call key has been pressed, the Wireless Telephone is
While in the active state, you may switch to any display – Line, Feature, or Menu – by pressing its corresponding key. Pressing a softkey will activate the feature displayed.
Line Appearances
While off hook, press the LINE key to view the shortcut keys and assigned extensions for line appearances. There are nine possible line appearances which correspond to the nine indicators at the top of the Wireless Telephone display. When a line is in use, the indicator converts to the line number and a + will appear after the shortcut key on the list, emulating a lit LED. Press the LINE key again to display the second page of the list if more than four line keys have been programmed. To use an extension, press the corresponding shortcut key. You may also use the Up, Down, and Select buttons to scroll through the displays and activate the line appearances on this list. Press the End Call key to exit the Line Appearance list.
PN: | Page 27 |