![](/images/new-backgrounds/1257267/25726757x1.webp)
SpectraLink Corporation | Setup and |
| Mitel Networks ICP and 5220 IP Phone emulation |
8. Testing a Wireless Telephone
Verify proper registration and operation of each Wireless Telephone by performing the following tests on each Wireless Telephone in an active wireless area.
1.Power on the Wireless Telephone by pressing Power On. You will see a series of messages displayed as the Wireless Telephone acquires the system. The Wireless Telephone should display the user extension or dashes if no extension is programmed. Any error messages should clear.
2.Press the Start Call key. The extension number should be replaced by information from the supported Mitel Networks VoIP solution and you should hear dial tone. Place a call and listen to the audio quality. End the call by pressing the End Call key.
3.Place a call to the Wireless Telephone and verify ring, answer, clear transmit, and clear receive audio.
4.Go
5.Go
6.Press the End Call key. Any line indicators should turn off and the extension number display will return.
PN: | Page 29 |