Topcom Allure 270
11.2 Calling a Direct Memory number
•Press the desired Direct Memory key, the stored number is displayed.
•Press handsfree or pick up the handset.
12 Sleep mode
To avoid that you are disturbed during a specific period, you can activate the sleep mode. The telephone will not ring during sleep mode, except for calls dedicated as VIP in the call list. VIP calls will always ring.
Once the sleep mode time is past, the telephone will always ring.
•Press for 2 seconds
•Press repeatedly to select the sleep time
•Press to confirm
To disable the sleep mode, follow the same steps and select 00-00.
13 Answering machine
13.1 Recording an outgoing messages (OGM)
13.1.1 OGM1
OGM1 is the Outgoing Message that each caller will hear when your answering device answers the call.
To record the Outgoing Message 1:
•Press and hold .
•After you hear a beep, release and start saying your outgoing message (max 30 seconds).
•Press again to end recording.
•The device will playback the recorded message after a beep.
To check your OGM1 again, press briefly.
When no outgoing message is recorded, a
13.1.2 OGM2
OGM2 is the message that the caller will hear that is calling from the telephone number which is set in the menu ‘OGM2 CID NO’.
When the Allure 270 receives the preprogrammed Caller ID number, this message will be playbacked instead of OGM1. With this function you can record dedicated messages for one person.
ENGLISH
Topcom Allure 270 | 33 |