Topcom 1150 Incoming messages, Memo message recording, Playing recorded messages, Remote control

3SEC

Topcom Fidelity 1150

14.6Incoming messages

After the set number of rings the TAD will answer the call, the caller will hear your outgoing mes- sage (OGM).If OGM1 is selected, he can record a message (max 2 minutes) after the beep. As soon as you have new messages the number of new messages will be displayed. The recording will be interrupted when it detect silence for 6 seconds or when you pick up the handset.

14.7Memo message recording

To record a Memo message

After you hear a beep, release the button and start saying your Memo message (max 2 minutes)

To stop the recording

Memo messages will be stored together with the incoming call recordings.

14.8Playing recorded messages

In idle mode:

The unit shall play the new messages

Every time a message is recorded, the date and time will also be stored if the date and time is set (see chapter 7.4). When playing back a message, the date and time of the recording will be announced before the message.

	To pause the playback
<1s	To replay the message
2 X	To skip to the previous message
	To skip to the next message
	To stop playback

After all messages have been played, press to re-play all messages.

14.9Deleting one messages

During playback of the message.

‘DELETE?’ will be displayed

To confirm and delete the message

If no button is pressed in 30 seconds, the unit will continue playing the messages

14.10 Deleting all messages

During playback of the last message.

2SEC ‘DELETE ALL?’ will be displayed To confirm and delete all messages

If no button is pressed in 30 seconds, the unit will continue playing the messages

14.11 Remote control

The answering machine can be operated remote- ly using a touch-tone phone (DTMF tone selection system).

•Call your machine. You will hear the OGM message.

•After the beep, slowly dial the Security code, you will hear one short beeps for confirmation.

•Enter the next codes to use the desired function.

1	Replay the message
1(1)	Play the previous message
2	Play/Pause
3	Play the next message
4	To play the outgoing message
5	To record a new outgoing message
6	Stop playback or recording
7	Delete playing message
8	Answering off
9	Answering on / Toggle OGM1 or
	OGM2
0	Delete all, old messages
#	Record Memo

If no button is pressed within 10 seconds, the unit will return to standby mode.

During playback, the unit will stop every 168 seconds. If no button is pressed, the unit will stop and hang up.

When pressing ‘2’ the message playback is paused for 30 seconds. If no button is pressed the unit will hang up.

10 Topcom Fidelity 1150