Wall mounting, Technical Data, Warranty

14.12 Remote activation

If the answering machine is OFF, the user can wake-up the device remotely by dialing the number and wait for 12 rings.

The machine will answer with OGM2.

Enter the remote code and follow the instructions explained in chapter 14.11.

14.13 Memory Full

There are 2 kinds of Memory Full situations.

1.During Memo/OGM/ICM recording, the memo- ry is full.

2.The memory is full and somebody is trying to record a message.

The unit shall play a message indicating the mem- ory is full.

When OGM 1 was selected, the device will switch automatically to OGM2 (see chapter 14.2).

15 Wall mounting

Pull out and rotate the wall mounting hook (25). Put it back in position.

Measure and mark the wall mounting locations (28).

Drill holes, fit wall plugs and screw in screws. The cable of the telephone can be fixed in the slot

(30)on the backside of the phone depending on the telephone connection position.

Mount the telephone on the screws.

16 Technical Data

Dialling options: DTMF (tone)/PULSE Flash:100/300/600ms

Power adapter: Input 230VAC 50Hz / Output 9VDC 200 mA

Topcom Fidelity 1150

17 Warranty

17.1Warranty period

The Topcom units have a 24-month warranty pe- riod. The warranty period starts on the day the new unit is purchased. The warranty on batteries is limited to 6 months after purchase. Consuma- bles or defects causing a negligible effect on op- eration or value of the equipment are not covered. The warranty has to be proven by presentation of the original purchase receipt, on which the date of purchase and the unit-model are indicated.

17.2Warranty handling

A faulty unit needs to be returned to a Topcom service centre including a valid purchase note.

If the unit develops a fault during the warranty pe- riod, Topcom or its officially appointed service centre will repair any defects caused by material or manufacturing faults free of charge.

Topcom will at its discretion fulfil its warranty obli- gations by either repairing or exchanging the faulty units or parts of the faulty units. In case of replacement, colour and model can be different from the original purchased unit.

The initial purchase date shall determine the start of the warranty period. The warranty period is not extended if the unit is exchanged or repaired by Topcom or its appointed service centres.

17.3 Warranty exclusions

Damage or defects caused by incorrect treatment or operation and damage resulting from use of non-original parts or accessories not recommend- ed by Topcom are not covered by the warranty. Topcom cordless phones are designed to work with rechargeable batteries only. The damage caused by the use of non-rechargeable batteries is not covered under warranty.

The warranty does not cover damage caused by outside factors, such as lightning, water and fire, nor any damage caused during transportation.

No warranty can be claimed if the serial number on the units has been changed, removed or ren- dered illegible.

Any warranty claims will be invalid if the unit has been repaired, altered or modified by the buyer or by unqualified, non-officially appointed Topcom service centres.

ENGLISH

Topcom Fidelity 1150