Topcom 1150 manual To delete an OGM, TAD Setting

If the OGM is less than 3 seconds, the recording is not valid.

To stop the recording. The message will be playbacked

To replay the recorded OGM

14.4To delete an OGM

Select OGM1 or OGM2.

To replay the recorded OGM

Press the delete button during

playback. The pre-recorded message is prompted

14.5TAD Setting

14.5.1 Selecting OGM1 or OGM2

In of the TAD setting menu, you can also select the outgoing message.

Enter the menu

Select ‘TAD Setting’

Enter the submenu

Select ‘Answering’

To confirm

Select ‘Answering-A1’(OGM1) or ‘Answering-A2’(OGM2)

Confirm

ESC 2 X To leave the menu

14.5.2 Select the number of rings

To select the number of rings before the TAD an- wswers the call:

Enter the menu

Select ‘TAD Setting’

Enter the submenu

Select ‘TAD Rings’

To confirm

Select 2 to 9 or select T/S

Confirm

ESC 2 X To leave the menu

Topcom Fidelity 1150

T/S is ‘Toll Saver’. The TAD will answer a call after 4 rings if there are no new messages, and after 2 rings if there are new messages. If there are no new messages and you call your machine to check your messages remotely, you can hang up after the 2nd ring. You do not need to pay connection fees and you know that you do not have any new messages.

14.5.3 Setting the remote PIN code

This code is necessary for remote operation (see chapter 14.11)

Enter the menu

Select ‘TAD Setting’

Enter the submenu

Select ‘TAD Pin’

To confirm

Enter the new PIN code (3 numbers)

Confirm

ESC 2 X To leave the menu

14.5.4 Call Screen Mode

When there is an incomming call you can listen to the recording without picking up the handset.You can enable or disable this function.

Enter the menu

Select ‘TAD Setting’

Enter the submenu

Select ‘Call Screen’

To confirm

Select ‘Call Screen - On’ or ‘Call

Screen - Off’

Confirm

ESC 2 X To leave the menu

ENGLISH

Topcom Fidelity 1150 9