Connect the SX5D to AC Power
1)Connect the barrel connector of the power supply to the AC power input on the rear panel of the SX5D - see Figure 16.
2)Plug the AC power cord into the power supply.
3)Plug the AC power cord into the wall socket. The SX5D will power up automatically.
4)Check the cellular signal strength and move the unit until you achieve the best signal possible - see the Service Indication section of this manual.
Barrel Connector
AC Power Input
Wall Socket
AC Power Cord
Power Supply
Figure 16 – SX5D AC power connection.
Phonecell® SX5D GSM | 12 | Technical Manual |