SUPPLEMENTARY SERVICES (NETWORK DEPENDENT)
Call Divert (Forwarding)
Call Divert sends incoming calls to another telephone number, even when the SX5D is turned off. Call Divert options include all calls, calls that come in when the line is busy, calls that are not answered after a specified number of rings, or calls that come in when the SX5D is powered off or has lost the network signal (Not Found). Certain types of calls can be diverted, such as voice, data, fax, or text messages. Contact your service provider to acti- vate Call Divert.
Turn On Call Divert |
| |
1) | Press the MENU key. |
|
2) | Select Call Divert. |
|
3) | Select the desired criteria to use for diverting calls (All Calls, |
|
| When Busy, No Answer, Not Found). |
|
4) | Select On. | Call Divert (Forwarding). |
5) | To specify which types of calls to divert, select By Service. |
NOTE: If no services are specified, the SX5D will automatically divert calls of all types.
6) Highlight the desired service to divert, then press SELECT. The default is All Services.
Call Waiting
Call Waiting enables notification of incoming calls when the SX5D is
Turn On Call Waiting
1)Press the MENU key.
2)Select Settings.
3)Select Call Settings.
4) | Select Call Waiting. | Call Waiting. |
5) | Select On. |
|
Multiparty Calling
Multiparty Calling allows connection to multiple calls simultaneously. Contact your service provider to activate Multiparty Calling.
Engage a Multiparty Call
1)While in a call, put the call on hold (via a hookflash or the menu).
2)Dial a second number, then press the Flash key to connect it.
3)When the second call is answered, press the MENU key and select Multiparty.
5) Select the desired option. | Engage a Multiparty call. |
|
Join All: Join the active call with the held multiparty call.
Hold All: Place multiparty call on hold.
Next: Display the next call party in a multiparty call.
Transfer: Connects one call party to another call party and allows the user to leave the call.
Exclude: Place the selected party of a multiparty call on hold.
Private: Hold a private call with one party in a multiparty call. Other parties are put on hold.
I am busy: User defined user busy (UDUB) indicates BUSY to a waiting caller.
End All: End active and held calls.
NOTE: Options are available depending on the status of the call or calls. For example, if only one other person is in the call, only the End All option will display, or if all the calls, have been joined, the Join All option will not display.
Phonecell® SX5D GSM | 26 | Technical Manual |