VOX Selection Mode

-Then press the Up or Down button to select the desired sub-channel for use.

-Press the Power On/Off button momentarily to confirm selection.

The CTCSS mode can be turned off by selecting the oF icon as the setting.

NOTE: To communicate with other GMRS units, they must be switched to the same channel and CTCSS subcode. To communicate with other GMRS units that do not have subcodes, switch your unit to the same channel with the subcode set to oF.

The CTCSS subcodes do not prevent others from hearing your transmission. This will only allow you to ignore all traffic on a given channel not using the same subcode.

This option enables you to have hands-free conversation. Your voice or nearby sound is detected and the radio transmits without the need to press the PTT button.

To set radio for VOX operation,

-From GMRS standby mode, press the MODE button until the VOX icon flashes on the display.

-Press the Up or Down button to select VOX On (if oF appears flash- ing) and the 1-5VOX level sensitivity.

-Momentarily press the Power On/Off button to confirm the VOX selection.

-The VOX icon will appear steady on the LCD display.

VOX can be turned off by selecting oF as the setting.