Auto Channel Scan, Manual Channel Scan

OUT OF RANGE

GX2401c I/B version 09050A-1

2.Press (+) or (-) button or enter the memory location to find the memory location you want.

3.Press C. BACK button. The unit will make a call and the selected telephone number will be dialed automatically.

EDITING STORED TELEPHONE NUMBERS

817-456-7890

TALK

1.Ensure that the handset is in standby mode.

2.Press MEMO button on the handset. The LCD Display will show "MEMORY".

3.Search for the stored entry by pressing (+) or (-) button to scroll through the Memory Dialing Directory or by pressing the keypad button to enter the memory location number (01 -20) which has the name and number stored.

4.Follow steps 4-7 as described in the section Storing Telephone Numbers Into Memory to overwrite the selected entry.

MIXED MODE DIALING (Temporary Pulse to Tone Dialing)

1.If you only have pulse (rotary dialing) service in your area and want to access Tone services (Bank by Phone, etc.), ensure that the T / P (Tone / Pulse) switch on the bottom of the base unit is set to the Pulse position.

2.Press the TONE ( * ) button once to switch from Pulse to Tone dialing temporarily. Pulse dialing mode resumes when the call is ended.

PAUSE FUNCTION

∙In some cases, such as PABX or long distance service, a pause may be needed in the dialing sequence. Pressing the handset RE / PA button inserts a four-second delay between dialed numbers.

FLASH FUNCTION

∙Used to access custom calling features such as Call Waiting or Three-Way Calling provided by your local phone company. Flash can also be used to restore a dial tone to make a new call.

CHANNEL SELECTION (40 Channels)

A.AUTO CHANNEL SCAN

∙When you place or receive a call and handset TALK button is pressed, the GX2401c auto-scans for a clear channel.

∙	Once it finds a clear channel, the handset LCD Display	symbol will
	light steadily.

B.MANUAL CHANNEL SCAN

∙If the existing channel becomes noisy or starts having interference, you can either move closer to the base unit or

press the SCAN / PRG button on the handset until better	(Figure 12)
reception is found.

OUT OF RANGE WARNING

∙The handset and base unit communicate up to a certain maximum range. The distance can be affected by weather, power lines, or even other cordless telephones.

∙If you far away from the base unit, the handset beeps and "OUT OF RANGE" is shown on the LCD display to warn you

that the background noise level is too high for proper communication between the handset and the base unit.

∙When you hear this sound and see the "OUT OF RANGE" display, you should move

09050A-1

OWNER’S MANUAL#GX2401c VER.09050A-1

PAGE: 17

English version