Audiovox GX2401c HOW to SET User and Neighboring Area Code, HOW to SET Callback Number

No area code is registered.

817 _ _ _ _ _ _

AREA CODE

817 913 412 AREA CODE

GX2401c I/B version 09050A-1

The symbol CW indicates that CIDCW is ON mode.
NOTE: In CIDCW OFF mode, Call Waiting function will not operate.
D. HOW TO SET USER AND NEIGHBORING AREA CODE
1.	In standby mode, press SCAN / PRG button.	_ _ _ _ _ _ _ _ _
2.	Press 3 button, or press (+) button three times.	AREA CODE

3.Enter your 3 digits area code.

4. If your area is not Split area, press SCAN / PRG button to save and exit.

5. If your area is one of the Split area, enter neighboring area code.

817 = User's area code, 913 and 412 = Neighboring area code.

6.Press SCAN / PRG button to save and exit.

NOTE: If the number is incorrect, press DEL button and restart on step 3.

E. HOW TO SET CALLBACK NUMBER

This is the number of digits to be called back when making a call using the Call Record and when the area code of the incoming telephone number is same as your area code. Refer to Callback Dial Operation on page 18.

The factory setting is 7 digits.

1.	Press SCAN / PRG button.			07
2.	Press 4 button, or press (+) button four times. The Callback
				CALLBACK NUMBER
3.	Number is displayed.
	Press	or	button to change the Callback Number.	10
	The Callback number scrolls as 07 10 07.
				CALLBACK NUMBER

4.Press SCAN / PRG button to save and exit.

F. HOW TO SET RINGER ON / OFF

1.In standby mode, press SCAN / PRG button.

2.	Press 5 button, or press (-) button three times. The current				RINGER ON
	mode is displayed.
3.
	Press	or	button to change mode.
4.	Press SCAN / PRG button to save and exit.				RINGER OFF
G. HOW TO SET TIME
NOTE: The time set is for the LCD Display time. If CALLER ID					12:20 AM 10/20
signal comes in, the time will adjust automatically.
					TIME SET
1.	In standby mode, press SCAN / PRG button.
2.	Press 6 button, or press (-) button two times. The current time is displayed.
3.	Enter 2 digits hour. The position to edit is blinking. Use			button to delete error entry.

4.Enter 2 digits minute.

5.Press 1 for AM and 2 for PM.

6.Enter 2 digits month.

7.Enter 2 digits day.

8.Press SCAN / PRG button to save and exit.

H. HOW TO ADJUST THE CONTRAST OF LCD DISPLAY

1.In standby mode, press SCAN / PRG button.

2.Press 7 button, or press (-) button once. The current contrast is displayed.

3.Press or button to change the contrast.

The contrast scrolls as 01 02 03 (Three steps).

4.Press SCAN / PRG button to save and exit.

02

CONTRAST

21 09050A-1

OWNER’S MANUAL#GX2401c VER.09050A-1

PAGE: 21 English version