CALLER ID SETUP
To Set Area Code
1. After the Handset battery is fully charged, the LCD display will show “AREA CODE ”.
2.Press the REVIEW “” or “” button, then enter
your area code number using the number pad on the handset.
3. Press the MEM key to confirm.
The unit will show the default Time/Date (12:00 A.M. 1/01). The time and date will be automatically updated when the first incoming Caller ID call is received.
To Set Contrast
You can adjust the display contrast by pressing the
FLASH button in standby mode.
1.Press the “” or “” button to adjust the handset
display contrast to the desired level.
2.Press the MEM key to confirm.
3.To adjust the contrast of the base LCD display, press the FLASH button on the base. Press the “*” or “#” button to adjust the base display contrast. Press the FLASH button again to confirm.
To Set Language
You can change the display language by press and hold the MEM button for 2 seconds in standby mode.
1.The LCD display will show “SET LANGUAGE”.
2. Press the REVIEW “” or “” button to select ENGLISH, FRENCH or SPANISH.
3.Press the MEM key to confirm.
Then the unit will go through the set area code and set contrast.
NOTE:
1.The Caller ID setup procedure will not begin until the handset is fully charged.
2.To set up your telephone again, press and hold the MEM button for 2 seconds in Date/Time screen.
3.Your telephone will always stay in set area code mode, until you complete the setup step. However, it will still record the Caller ID information. This information can be reviewed only after set up is complete.
14
TELEPHONE OPERATION
Tone / Pulse Operation
Your telephone will operate on tone or rotary (pulse) systems.
1.If your house is wired for rotary service, move the Tone/Pulse switch to the Pulse position.
2.If your house is wired for Tone Service, move the Tone/Pulse switch to the Tone position.
3.If you are unsure of the type of dialing service you have, set the switch to Tone. On the handset, press the TALK button and dial any digit on the keypad. If the dial tone persists, switch to Pulse. To disconnect, press the TALK button again, or set the handset in the cradle.
Digital Security System
Your telephone is equipped with a digital security coding system to protect your base unit from being accessed by other cordless telephones.
The code allows your base and handset to recognize each other so that other cordless phones will not make calls on your line.
If the AC adaptor is disconnected or a loss of power occurs while the handset is away from the base unit, the security code will be lost and the phone will be inoperable. If this occurs, reconnect the AC adaptor and return the handset to the base unit so that the security code is reset.
When the handset is not in the base, only a handset having the identical security code and operating on the same channel can access the base and use your phone line.
When the handset is in the base, no other handset, even those having the identical security code and operating on the same channel can access the base and use your phone line.
Digital security coding will also eliminate the “false” ringing associated with cordless telephones not equipped with this feature.
15