Sharper Image 6031 important safety instructions Make sure the ringer is on, Base

Problem

Suggestion

The telephone does

• Make sure the ringer is on (page 9).

not ring when there is

• Make sure the telephone line cord and power adapter are plugged in properly (page 3).

an incoming call.

• The cordless handset may be too far from the telephone base. Move it closer to the telephone

base.

• There may be too many extension telephones on the telephone line to allow all of them to ring

simultaneously. Try unplugging some of them.

• If the other telephones in your home are having the same problem, the problem is in the wiring

or local service. Contact the local telephone company (charges may apply).

• Other electronic products can cause interference to your cordless telephone. Try installing your

telephone as far away as possible from the following electronic devices: wireless routers, radios,

radio towers, pager towers, cellular telephones, digital telephones, intercoms, room monitors,

televisions, VCRs, personal computers, kitchen appliances, and other cordless telephones.

• Test a working telephone at the telephone jack. If another telephone has the same problem, the

problem is in the telephone jack. Contact your local telephone company (charges may apply).

• The telephone line cord might be malfunctioning. Try installing a new telephone line cord.

• Remove and re-insert the battery and place the cordless handset in the telephone base.

• Wait for the cordless handset to synchronize with the telephone base. Allow up to one minute

for this to take place.

34

www.vtechphones.com