Sharper Image 6031 important safety instructions Disconnect the power to the telephone base

Page 41

Troubleshooting

Problem	Suggestion
My cordless handset	• Make sure the power cord is securely plugged into the telephone base. Plug the unit into a
beeps and is not	different working electrical outlet not controlled by a wall switch.
performing normally.	• Move the cordless handset closer to the telephone base. It may be out of range.
	• Reset the telephone base by unplugging the unit’s electrical power. Wait for 15 seconds and
	plug it back in again. Allow up to one minute for the cordless handset and the telephone base
	to synchronize.
	• Other electronic products can cause interference to your cordless telephone. Try installing
	your telephone as far away from these electronic devices as possible: wireless routers, radios,
	radio towers, pager towers, cellular telephones, intercoms, room monitors, televisions, personal
	computers, kitchen appliances and other cordless telephones.

Common cure for	• If the unit is not responding normally, try putting the cordless handset in the telephone base.
electronic equipment	If it does not seem to respond, try the following (in the order listed):
	• Disconnect the power to the telephone base.
	• Disconnect the battery on the cordless handset.
	• Wait a few minutes before connecting power to the telephone base.
	• Re-install the battery and place the cordless handset into the telephone base.
	• Wait for the cordless handset to synchronize its connection with the telephone base. Allow up
	to one minute for this to take place.

38	www.vtechphones.com

Image 41

Contents Congratulations Table of contents Table of contents Parts checklist InstallationInstall handset battery 800 Telephone base installationDial type Desk/table bracket installationIf you subscribe to DSL service Handset layout Telephone settingsTelephone base layout Telephone settingsBasic operationRing melody Date and timeBattery low tone Ring volumeKey tone Out of range toneKey tone is on To reach Key beeps. Press MENU/SELECTPress MENU/SELECT Edit handset nameLanguage Press or to reach Clr VoiceMail. Press MENU/SELECT Clear voicemailSelect Reset to default settingsMake, answer and end calls Basic operationOptions while on calls Speakerphone MuteFind handset Directory Advanced operationReview the directory Search the directoryCharacter chart Dial a directory entry Store a directory entryDelete from the directory Edit an entry in the directoryTo delete an entry Key Tone is on To delete all entriesAbout caller ID Review the call log Call logStore a call log number Dial a call log numberTo delete one entry Delete from the call logStore a redial number to the directory RedialReview redial Delete from redial Dial from redialHandset light Handset and telephone base indicatorsTelephone base lights Handset iconsDisplay When Handset display screen messagesCall log display screen messages Check BatteryBattery Important safety instructions Low Battery is Troubleshooting40 for further instruction Charge light is off in this sectionirst, try all the above suggest ions Base Make sure the ringer is onLess background noise There is noise Make sure the telephone line cord is plugged in securely Hear other calls whenDisconnect the battery on the cordless handset Disconnect the power to the telephone baseOperating range MaintenanceAbout cordless telephones WarrantyHow do you get warranty service? FCC Part FCC, Acta and IC regulationsIndustry Canada Rbrc sealTechnical specifications Index Search the directory 91-001079-010-100 User’s manual