CALLER ID OPERATION (CONT.)
CALLER ID OPERATION (CONT.)
Reviewing All Call Records
1.After you have reviewed all of the new calls, press “” or “” buttons. The LCD display will show the calls stored in memory.
2.After the last call record is reviewed, the LCD will show
Caller ID Redial
THE LOCAL AREA CODE MUST BE PROGRAMMED IN ORDER TO FULLY UTILIZE THE REDIAL FEATURE (SEE PAGE 14). The GH3012 allows you to redial a phone number stored in the Caller ID memory.
1. | Press the “” or “” button to select |
the Caller ID number that you want to dial. | |
2. | Press and release the CALLS button |
which activates the handset to dial the | |
(2) 7 digits with a 1 :
If it is necessary to insert a 1 prefix to your local call, simply press the CALLS button TWICE WITHIN 2 SECONDS.
(3) 10 digits without a 1 :
In some areas of the country, the area code must be included even when dialing a local call. In this situation, set your GH3012 area code to another 3 digits not being used in the U.S. i.e. 100,etc. Once your area code is programmed as above, your GH3012 will record all 10 digits for every incoming call. Since the prefix 1 will be added automatically when dialing a 10 digit number, press the CALLS button TWICE WITHIN 2 SECONDS for a local 10 digit call without a prefix 1.
(4) 10 digits with a 1 :
Since the prefix 1 will be added automatically when dialing a 10 digit number, simply press the CALLS button ONCE to make your call.
Caller ID Erase
To Erase a Single Call
1.Press the “” or “” button to review the Caller ID records you received.
2.Press DEL button to erase the call displayed; the display will show “ERASE ?” on the bottom line.
3.Press DEL button again; the Caller ID will be erased and the display will show the next message.
NOTE:
If the current message displayed is the last message, then the display will return to standby mode.
VIP Calls
The GH3012 allows you to create VIP call records. When a VIP call is received, 4 beeps will sound between rings, to alert you this is a VIP call.
To Create a VIP Call record :
1.Press the “” or “” button to select the Caller ID which you want to assign a VIP ringer.
2.Press and hold the CALLS button for
2seconds. The “VIP” icon is displayed.
NOTE:
4 beeps will also sound when the incoming VIP call is a Call Waiting call.
desired number. The number will scroll |
across the screen from right to left as it is |
dialed. |
With current telecom redialing situations, there are 4 redial options:
(1)7 digits without a 1 prefix
(2)7 digits with a 1 prefix
(3)10 digits without a 1 prefix, and
(4)10 digits with a 1 prefix.
(1) 7 digits without a 1 :
If the area code of the Caller ID number matches to the setting of your GH3012, redial your local call by pressing the CALLS button ONCE.
20
NOTE:
Use caution when pressing the CALLS button. Press and release rapidly. If the CALLS button is pressed and held for more than 2 seconds, the VIP CALL feature will be activated.
To Store a Caller ID Number to Memory:
1.Press “” or “” buttons to select number from Caller ID list.
2.Press MEM button. The LCD display will show “LOCATION ? x”
3.Press the location number. The LCD display will show “MEM x STORED”.
To Erase All Calls
1.Press the “” or “” button to review the Caller ID records received before erasing all calls.
2.While the display is in standby mode, press and hold the DEL button for 2 seconds. The display will show “ERASE ALL ?” on the bottom line.
3.Press the DEL button; all VIEWED calls will be erased.
NOTE:
1.If there are messages that have not been reviewed, the “Erase All Calls” function cannot be performed.
2.VIP calls will not be erased when you erase all calls.
To Remove a VIP Call :
1.Press the “” or “” to select the call you have marked “VIP”.
2.Press and hold the CALLS button for
2seconds. The “VIP” icon will disappear.
21